Please select To the mobile version | Continue to access the desktop computer version

Foscam BBS

Search
View: 301|Reply: 2

NVR FN3104H with Amcrest IP2M-841B?

[Copy link]

1

Threads

1

Posts

7

Credits

Newbie

Rank: 1

Credits
7
Post time 2017-02-17 19:56:59 | Show all posts |Read mode
Hello,

Could someone help me out with the config settings to allow this config to work?  Camera does not show up on NVR Current IP Cam list set up screen.  Cam is available via direct ip address.  Ive tried a multitude of settings to align but I am not a network config expert.

Any help would be appreciated!


Reply

Use magic Report

0

Threads

297

Posts

834

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
834
Post time 2017-02-20 19:17:45 | Show all posts
Hi Sparky,

As I know, when you add other brand camera to Foscam NVR, you should use the ONVIF protocol to add, so you can go to NVR settings page to add that camera maually. Thank you.
Reply Support Not support

Use magic Report

0

Threads

1

Posts

4

Credits

Newbie

Rank: 1

Credits
4
Post time 2017-06-18 07:40:49 | Show all posts
I am experiencing similar issues. I eventually got the cams to show in the list by opening ports to both cams. I was able to add both amcreast IP Cameras to the Foscam 3104H and could see they were linked to channel 1 and 2 however when I went to view both channels, nothing. I get an error stating no IPC found!! at wits end here
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list